|
This
tool defines a new reference system based on points and lines.
Setup
Coordinate system
- Reference - Reference system selection
Point or Line 1 - Sets
the Point/Line to base the reference calculation. The Point/Line is
previously found by another tool.
- Tool - Name of tool
- Result - Name of point or line
Point or Line 2 - Sets
the Point/Line to base the reference calculation. The Point/Line is
previously found by another tool.
- Tool - Name of tool
- Result - Name of point or line
Note: the resulting reference system is calculated differently
based on the settings:
- Point1, Point2: Point1 defines the origin; the x axis points
towards Point2
- Line1, Line2: Origin is the intersection point; the x axis is
parallel to Line1
- Point1, Line2: Origin is Point1, the x axis is parallel to
Line2
- Line1, Point2: Origin is the projection of Point2 onto Line1;
the x axis is parallel to Line1
Rotation - rotate the outgoing reference system additionally
- Rotate resulting reference - add rotation to the reference
system
- Angle - the rotation angle
- Also modify result angle - modify both outgoing reference system and
results
Visualisation
|
Item1 |
Point1 or Line1 |
|
Item2 |
Point2 or Line2 |
|
Axes (Child, Reference, Result) |
The axes of the incoming, new or
result coordinate systems |
Results
|
Angle
|
The
new coordinate system angle
|
|
Origin(.x/.y)
|
Origin of the new coordinate system
|
|
