1.0.0.22 - 2mar2012, min Scorpion Vision Software version: 7.x.x.x, Matrox Imaging Library: 9.00.1950

• Added GrabTimeout property

1.0.0.21 - 31aug2011, min Scorpion Vision Software version: 7.x.x.x, Matrox Imaging Library: 9.00.1950

• Open multiple boards for same type card

1.0.0.20 - 26aug2011, min Scorpion Vision Software version: 7.x.x.x, Matrox Imaging Library: 9.00.1950

• special build

1.0.0.19 - 10may2011, min Scorpion Vision Software version: 7.x.x.x, Matrox Imaging Library: 9.00.1950

• try using either MdigGrab or MDigProcess for grabbing - required to support SonyXCG via Concord

1.0.0.18 - 6may2011, min Scorpion Vision Software version: 7.x.x.x

• support M_MONO8_VIA_RGB for monochrome mode

1.0.0.17 - 4feb2011, min Scorpion Vision Software version: 7.x.x.x

• color support (8 bit)

1.0.0.16 - 23mar2010, min Scorpion Vision Software version: 7.x.x.x

• fixed device id in initialization
• 'continous' property

1.0.0.15 - 03feb2010, min Scorpion Vision Software version: 7.x.x.x

• supported systems: Morphis, Solios, Helios, Radient, Vio
• name changed to Mil9.dll
• allows to change Width, Height and HeightMultiplier through setProperty(). Applied after camera reset.

1.0.0.14 - 06nov2009, min Scorpion Vision Software version: 7.x.x.x

• after changing DCF file restart is not required
• relative path to DFC file inside profile
• log in to file parameter is not persistent
• allows to open configuration dialog during grab

1.0.0.13 - 26jun2009, min Scorpion Vision Software version: 7.x.x.x

• continuous mode
• check that required size of shared memory allocated

1.0.0.12 - 23jun2009, min Scorpion Vision Software version: 7.x.x.x

• image transfer to shared memory driver

1.0.0.11 - 02jun2009, min Scorpion Vision Software version: 7.x.x.x

• LUT table for 16bit image source
• logarithmic LUT table generation

1.0.0.9 - 20may2009, min Scorpion Vision Software version: 7.x.x.x

• fix for 16bit image shift & conversion

1.0.0.8 - 27feb2009, min Scorpion Vision Software version: 7.x.x.x

• status messages
• right shift for 16bit image conversion into 8bit

1.0.0.7 - 27feb2009, min Scorpion Vision Software version: 7.x.x.x

• HeightMultiplier parameter exposed via getproperty/setproperty

1.0.0.6 - 17feb2009, min Scorpion Vision Software version: 7.x.x.x

• MIL 9 support
• switchable port parameter access
• name changed to MatroxSolios.dll

1.0.0.5 - 27oct2008, min Scorpion Vision Software version: 6.x.x.x

• file description change in dll resources

1.0.0.4 - 22oct2008, min Scorpion Vision Software version: 6.x.x.x

• basler port opened on demand only
• synchronizing with basler camera values on camera close
• arbitrary setting of basler parameters (checkboxes introduced)
• on demand check of boundary values for linePeriod/exposureTime parameters
• default DCF file specified by checkbox
• property dialog tuning (OK/Cancel on the right, smaller linespaces)

1.0.0.3 - 15oct2008, min Scorpion Vision Software version: 6.x.x.x

• updated properties dialog to contain two property pages
• setting of gain, exposure, line period, digital offset parameters to basler camera registers

1.0.0.2 - 10oct2008, min Scorpion Vision Software version: 6.x.x.x

• large images
• updated property dialog window
• file versions introduced

1.0.0.1 - 26sep2008, min Scorpion Vision Software version: 6.x.x.x

• initial version