Up | Start up | Terminate | Before Start | After Stop | Before inspection | After inspection | Unknown unit | Quality alarm activation | Quality alarm deactivation | Before Open Settings | After Close Settings | Before Open Service | After Close Service | Image N exposed | Image N complete | Image grab | After image acquisition | Inspection | User defined | Error

 

  

 
Image N exposed

This event is called when an image is exposed.

Typical commands:

  • io-signalling

Internal name:

  • Image<n>Exposed, <n> = 1..no of images

Note:

This event is rarely called and depend upon the camera driver properties. Some camera drivers may have some transfer delay after the image is exposed and the image is transferred into the computer memory. In time critical systems io-signalling may be set up during this transfer period.

This event is not used for Firewire and USB cameras.

 

Scorpion Vision Version XII : Build 646 - Date: 20170225
Scorpion Vision Software® is a registered trademark of Tordivel AS.
Copyright © 2000 - 2017 Tordivel AS.